 I decided to go ahead and install limit switches so I could do the TTS repeatable tool holders, probe and MSS (Mach Standard Mill) implementations at once. I am very sick of touching off after every tool change!! It was Taking me forever to come up with a design that I could machine on the mill, and then it hit me, 3D print them! I have make simple mounts for the TEMCO limit switches found here. X axis mount: This was the easiest because the adjustable stops were already on the cross slide. I also extended the bottom so that it would protect the Y axis lead screw that gets exposed. Then the Y axis mount and rail for adjustable stops: (Pics to follow!) Z axis mounts and stop rail: 
As per the request below, here are the .STLs for the mounts.
The switches are repeatable to below 0.001" on all axis, works for me!!
3 Comments
Luke P
4/26/2015 06:00:47 pm
Can you post the stl files for the 3d printed parts?
BETZtechnik
5/5/2015 12:34:07 pm
Sorry for the delay, the STL files are now in the blog post! Leave a Reply. |
Author
Peter Betz Archives
April 2020
Categories
All
|
||
RSS Feed
