BT121 Breakout board
SKU:
$35.00
8
35
$8.00 - $35.00
Unavailable
per item
SPECIAL ORDER: EMAIL US
Finally, fully tested and ready to go!
Bluegiga's newest offering, the BT121 dual mode Bluetooth device.
Only a few left!
- Bluegiga's newest BT121 Dual mode bluetooth chip
- Rechargeable Li-po battery power ready (solder pads on bottom of board, as well as a JST-XH connector pins on the bottom)
- Lipo charging through Micro USB (with charge and ready LEDs via intelligent battery charge management IC)
- Board mounted temp sensor to shut down charger if the battery >65c
- USB power directly
- Extra button added that brings PB12 high
- Reset button
- On/ Off switch (selects between USB or Battery power)
- Dual row 0.100" headers for breadboard mounting- Two user configurable LEDs
- Includes a 3 axis accelerometer on i2c! In addition, a solder jumper on the bottom of the board to remove power from the accelerometer for low power applications, or where the accelerometer is not required.
New: Option to order the battery with a rechargeable LiPo battery, or just the bare minimum required to prototype with the BT121 (no LiPo charger, no accelerometer, no battery temp sensor)!
- Rechargeable Li-po battery power ready (solder pads on bottom of board, as well as a JST-XH connector pins on the bottom)
- Lipo charging through Micro USB (with charge and ready LEDs via intelligent battery charge management IC)
- Board mounted temp sensor to shut down charger if the battery >65c
- USB power directly
- Extra button added that brings PB12 high
- Reset button
- On/ Off switch (selects between USB or Battery power)
- Dual row 0.100" headers for breadboard mounting- Two user configurable LEDs
- Includes a 3 axis accelerometer on i2c! In addition, a solder jumper on the bottom of the board to remove power from the accelerometer for low power applications, or where the accelerometer is not required.
New: Option to order the battery with a rechargeable LiPo battery, or just the bare minimum required to prototype with the BT121 (no LiPo charger, no accelerometer, no battery temp sensor)!
White LED to indicate the LiPo is being charged
Green LED to indicate charging is complete
bt121_routed.pdf | |
File Size: | 85 kb |
File Type: |
Prices in US Dollars